I got some cheap asa cf off amazon and the texture is really weird it looks almost like cordura.

Printed this vertically to match the layers to another part its being attached to.

Print settings:

Line width .62

Line height .24

Temp 270 -260

Flow ratio .95

UPDATE: fixed? filament spent 2 days in the dryer at 70c and and im using a 0.8 nozzle instead of a 0.6 nozzle no more lizard skin. my best guess is moisture was boiling off from the cf bits in the filament and causing lots of tiny bubbles.

still don’t recommend this brand of filament(eryone) i’ll be sticking with isanmate and sunlu.

  • ButteredWaffle_@reddthat.comEnglish
    0·
    3 months ago

    Hi, have you managed to fix this? My 2cts would be to do a flow calibration, and verify what size nozzle youre using (though this looks rather extreme to be a flow rate error).

    • shelf@piefed.socialOPEnglish
      0·
      3 months ago

      I tried a few different flow ratios and it didn’t fix but while printing it randomly hit a line of filament that didn’t seem to have any carbon fiber in it and it was fine.

      Anyways I think I’m just going to avoid this filament it was 16 bucks which should have been my first sign and it smells like abs not asa. To top it all off it leaves a weird oily residue whic h stops the next print from sticking to the build plate.