• okwhateverdude@lemmy.world
    link
    fedilink
    English
    arrow-up
    0
    ·
    edit-2
    7 months ago

    ACAB but expressed in USB connector types (that funky shaped one on the right was a short lived USB connector type B). I only had like one peripheral, a scanner, that used it.

    EDIT: Lots of people pointing me to printers and music gear with those ports! I dabble in music and my little korg nanoKEY2 uses mini USB. And I’ve not bought a new printer in over a decade (laser printer toner lasts forever). I think I unintentionally invoked Cunningham’s Law here

    • Rose@slrpnk.net
      link
      fedilink
      English
      arrow-up
      0
      ·
      7 months ago

      USB 1.x type B definitely wasn’t short lived, I’ve picked up new devices with a B connector in recent years.

      The B connector you pretty much never see is the USB 2.0 one. Pretty much all devices I’ve seen use the wide version of USB Micro-B or, you know, USB C.

      • 4aceb14e@lemmy.world
        link
        fedilink
        English
        arrow-up
        0
        ·
        7 months ago

        Are you thinking of the USB 3.0 versions of Type B? 1.0 and 2.0 should be pretty much indistinguishable.

    • halcyoncmdr@piefed.social
      link
      fedilink
      English
      arrow-up
      0
      ·
      7 months ago

      a short lived USB connector type B

      Not short lived at all, it’s literally one of the three standard connectors alongside A and C. USB is an inherently directional protocol, so one side if the host device and the other is the peripheral device. The difference between Type A and B plugs helped enforce that directionality. Prior to the C connector becoming the new standard regardless of direction, all USB cables had both a Type-A and Type-B connector. (A to A cables violate the spec, and are an abomination).

      The miniUSB and microUSB connectors are both Type-B connectors, just physically smaller to accommodate smaller peripheral devices. There’s also technically a mini-A and micro-A, but they’re very uncommon since host devices are usually large enough for a full size plug, and now USB 3.0+ Type-C connections don’t require a directional cable the same way.

      • sem@piefed.blahaj.zone
        link
        fedilink
        English
        arrow-up
        0
        ·
        7 months ago

        I have a bunch of USB hubs that plug into a USB-A outlet and then give you USB-A outlets. Are these not cursed because they’re a hub?

        I also have a switchable USB hub from Amazon that lets you send your USB hub outlets to one out of four host devices. I use this to be able to have my mouse and keyboard plugged into my desktop or switch it to my laptop, if I have my laptop plugged into a USB dock.

        That switchable USB hub uses USB-A to USB-A cables to connect the hub to the host devices. What cable should it use instead for this purpose? USB A to USB B? And the hub would have four USB-B inputs on the back?

        To answer my own question, here is a expensive version of what I’m talking about, which uses USB-A to USB-B. https://www.startech.com/en-us/usb-hubs/hbs304a24a

        And here is the cheap version I have from Amazon, over $100 cheaper which uses the cursed cable… https://www.amazon.com/dp/B0CHY8L11W/

  • Owl@mander.xyz
    link
    fedilink
    English
    arrow-up
    0
    ·
    7 months ago

    I think that “ACAB” is a bad thing, however I have to admit that this is clever