So much for the constitution

  • SocialMediaRefugee@lemmy.world
    link
    fedilink
    English
    arrow-up
    0
    ·
    3 months ago

    Criminals have easy access to real guns, they won’t bother with printing plastic ones. A terrorist will just go to a place where they don’t monitor to print them.

    • UnderpantsWeevil@lemmy.world
      link
      fedilink
      English
      arrow-up
      0
      ·
      3 months ago

      Getting a proper industrially manufactured firearm has never been easier.

      The paranoia around Ghost Guns is more an expression of the gun regulation movement’s impotence.

      If you want a gun in this country, and you’ve got more than a couple hundred dollars, you can get one.

    • arctanthrope@lemmy.world
      link
      fedilink
      English
      arrow-up
      0
      ·
      3 months ago

      not much more difficult to make a much more effective gun out of stock metal (or so I’ve heard), but they don’t mandate government surveillance on the personal property of every person who owns a welding torch

      • graycube@lemmy.world
        link
        fedilink
        English
        arrow-up
        0
        ·
        3 months ago

        Although metal working requires skill, but downloading and 3d printing stuff not so much.

        • FlexibleToast@lemmy.world
          link
          fedilink
          English
          arrow-up
          0
          ·
          3 months ago

          From what I’ve seen, 3d printing a firearm isn’t worth the trouble. Especially when you can get 80%'s and finish them with a drill press.

        • SolSerkonos@piefed.social
          link
          fedilink
          English
          arrow-up
          0
          ·
          3 months ago

          That kind of metal working? Just to make a dogshit pipe gun that is mostly likely unsafe for the user too? Really doesn’t require a ton of skill. Probably more than using a user friendly 3D printer but probably less than a fiddly one.

          • ricecake@sh.itjust.works
            link
            fedilink
            English
            arrow-up
            0
            ·
            3 months ago

            Making a full on machine gun is literally one of the original cottage industries. They’re hard to design but the actual fabrication can be so dumbed down that you can make it out of non un-common household tools with minimal skill.

            Some of the tricky bits are making the weapon fire slower, so it doesn’t jam or get so hot rounds fire before they’re actually in the chamber. Or just keeps firing because releasing the trigger wasn’t enough to keep the recoil from keeping it going.
            If your goal is to give everyone in the UK too young, old or woman to draft a machine gun to make the Germans regret invading, then a horde of cockney 8 year olds with uncontrolled machine guns and poor trigger discipline is certainly a choice.

  • ramenshaman@lemmy.world
    link
    fedilink
    English
    arrow-up
    0
    ·
    3 months ago

    Just configured my router to block my new printer. Looking up how to set up Linux to block my slicer. Fuck this sucks.

  • jonesey71@lemmus.org
    link
    fedilink
    English
    arrow-up
    0
    ·
    3 months ago

    One of the most common uses for 3d printers is for cosplay props. I wonder if the lawmakers considered how this infringes on the rights of people trying to print prop guns from their favorite video games or anime?

  • AlteredEgo@lemmy.ml
    link
    fedilink
    English
    arrow-up
    0
    ·
    3 months ago

    In case anyone is wondering why something so idiotic: The destruction of 3D printing: Bloomberg is behind it - YouTube

    Of course this is not something a rag like the register and a fraudulent “Cybersecurity reporter” Connor Jones would tell you, but instead trying to actively hide from you. Even thought the evidence is right there. They’d rather tell you some stupid story.

    This is yet another mad plutocrat meddling in democracy and neoliberalism and pundits providing some nonsense explanation to distract people.

    • CanadaPlus@lemmy.sdf.org
      link
      fedilink
      English
      arrow-up
      0
      ·
      3 months ago

      There are devices now that have a SoC that’s completely locked down at the factory, although maybe none are 3D printers. It deserves more attention as the massive threat to digital freedom that it is.

      • BigDanishGuy@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        0
        ·
        3 months ago

        There are devices now that have a SoC that’s completely locked down at the factory, although maybe none are 3D printers.

        That has been around for decades. I mean one time programmable microcontrollers has been around since at least the 90s, and probably earlier IDK I didn’t start doing embedded development until the 2000s. I guess devices with readout disabled has been around for about as long. I have no idea how much it is used in 3d printers though.

        If you just don’t buy something locked down on a hw level, then because of the tinker tradition in 3d printing, you can relatively easy flash the firmware.

        It deserves more attention as the massive threat to digital freedom that it is.

        Yes, agreed. My point was on the futility of the law. But the fact of the matter is that the law exists and it shouldn’t from a freedom perspective. This is presented as a DRM issue, not a gun control issue. Should we ban printers because you may print a news article without buying the rights? Should we ban pen and paper because you could use it to infringe on a trademark by drawing it?

  • Echo Dot@feddit.uk
    link
    fedilink
    English
    arrow-up
    0
    ·
    3 months ago

    The standards will not mandate perfect efficacy – they will allow for “an acceptably low level of evasion” against a bank of identified design files.

    So they except this is basically an impossible task. Essentially they’re just going to check that the algorithm can detect the test examples, and then anything beyond that is an acceptably low level of evasion apparently.

    • rmrf@lemmy.ml
      link
      fedilink
      English
      arrow-up
      0
      ·
      3 months ago

      In the same way you can buy all the stuff to make a bomb without ending up on a list, but if you do it the stupid way you’re going to get the SWAT team at your door.

      The 3d printer firmware is bullshit outright IMO, but this seems like the most sober-minded attempt. NY’s law on the other hand is a fat lol

      • Echo Dot@feddit.uk
        link
        fedilink
        English
        arrow-up
        0
        ·
        3 months ago

        Anyone who was a serious threat is by definition not going to do it the stupid way anybody who gets swatted is an idiot and probably wasn’t a threat to begin with, except to themselves.

        It’s already illegal to shoot people so why is it more illegal to shoot people with a plastic gun?

        • rmrf@lemmy.ml
          link
          fedilink
          English
          arrow-up
          0
          ·
          3 months ago

          I agree, yet people get caught. This makes simply authorizes that, which I’m not inherently against. All I’m saying is, of all the things in the world, this isn’t the absolute worst thing that could happen and at least it isn’t (currently) being used by that state as a pretext for even more surveillance.

          It isn’t more illegal to shoot people with a plastic gun; if anything it’s less illegal because you don’t need to lie on a form about your status to obtain a gun.

          I think your arguing with what you think I’m saying instead if what I actually said. I believe we’re in agreement with different nuanced takes that affect that agreement. I agree this is dumb and a bad precedent that will likely be ineffective (just like virtually all other punitive preventative measures). I still think it could be worse.

          TL; DR: this law to me feels more along the lines of “let’s stop giving away guns at candy shops” than “let’s completely fix everything all at once” It’s sober minded and an attempt at appeasing their constituency. I disagree with it, but it could be worse and probably won’t hurt.

    • grue@lemmy.world
      link
      fedilink
      English
      arrow-up
      0
      ·
      3 months ago

      They just want to destroy open source firmware. They hate freedom from corporate control, not guns.

  • electric_nan@lemmy.ml
    link
    fedilink
    English
    arrow-up
    0
    ·
    3 months ago

    California also wants firearms manufacturers to develop a system that stamps your serial number on bullet casings when fired.

      • electric_nan@lemmy.ml
        link
        fedilink
        English
        arrow-up
        0
        ·
        3 months ago

        Haha yeah. I think they know it isn’t possible. Just trying to ban people from having guns one way or another. Disarm the cops and the other Nazis and then we can talk about mine.

        • Craccoon@lemmy.world
          link
          fedilink
          English
          arrow-up
          0
          ·
          3 months ago

          Exactly. They’ve got another thing coming if they think I’m going to disarm while these fascist fuckers are acting up.

    • explodicle@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      0
      ·
      3 months ago

      In the short term i think people will just drive out of state, like they already do for actual guns. CA gun laws are aimed at the working class, thanks Reagan.

  • w3dd1e@lemmy.zip
    link
    fedilink
    English
    arrow-up
    0
    ·
    3 months ago

    This is so stupid. This is designed by people who don’t understand 3D printing. This will catch nothing but fake guns that don’t work because they were printed in one solid piece, it won’t catch all the little pieces that you assemble afterwards.